Vid-Sa

SCREWS FOR PLASTIC

SCREWS FOR PLASTIC
These screws provide optimal performance in thermo plastics and thermoset plastics. By using screws for plastic, you may obtain reduced installation torques, increased resistance to vibration and relaxation. With differentdegrees of thread angles, these screws reduce boss bursting and radial stress. High torsional strength, high tensile strength and optimal material flow during installation are some other benefits of these screws.

Besides all these benefits, the screws with Type23 and Type25 point cuts, obtain minimized chip production in stiffer and harder plastics.

For low density materials sucs as plastic, nylon or wood with low driving torqoe and high stripping torque, you may use High-Low Screws to minimize stripping problems and risk of cracking your work piece.

Head Types	Countersunk (CSK), Pan, Oval Countersunk, Hexagon, Truss
Drive Types	Phillips, Pozidrive, Torx, Tamper resistant 6-Lobe, Phil-slot, Hexagon Socket, Square recess
Thread Types	Coarse thread, Fine thread, Partial thread,
Point Types	Flat, Sharp (Form S)
Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1),Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : 2,2-10 mm. Length : 5-100 mm.

Head Types	Countersunk (CSK), Pan, Oval Countersunk, Hexagon, Truss
Drive Types	Phillips, Pozidrive, Torx, Tamper resistant 6-Lobe, Phil-slot, Hexagon Socket, Square recess
Thread Types	Coarse thread, Fine thread, Partial thread,
Point Types	Flat, Sharp(Form S)
Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1),Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : 2-8 mm. Length : 4-100 mm.

Head Types	Countersunk (CSK), Pan, Oval Countersunk, Hexagon, Truss
Drive Types	Phillips, Pozidrive, Torx, Tamper resistant 6-Lobe, Phil-slot, Hexagon Socket, Square recess
Thread Types	Coarse thread, Fine thread, Partial thread,
Point Types	Thread Cutting Type23, Thread Cutting Type25
Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1),Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : 3-8 mm. Length : 10-100 mm.

Head Types	Countersunk (CSK), Pan, Oval Countersunk, Hexagon,Bugle, Truss
Drive Types	Phillips, Pozidrive, Torx, Tamper resistant 6-Lobe, Phil-slot, Hexagon Socket, Square Recess
Thread Types	Hi-lo thread
Point Types	Flat, Sharp (Form S)
Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1),Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : 3-6 mm. Length : 6-100 mm.

SCREWS FOR ALUMINUM

SCREWS FOR ALUMINUM
These screws are direct for light alloys such as aluminum and aluminum/glass façade systems. They provide overdrive security, low installation torque, hig stripping torque and high resistance to vibration. By using these screws you may obtain elimination of thread cutting operation, chipless assembly and repaet assemblies.

Other screws called Trilobular Screws, reduce friction during thread forming, resist loosening caused by vibration, lower drive torque and improve product consistency when used with aluminum pieces.

Head Types	Countersunk (CSK), Pan, Oval Countersunk, Hexagon, Truss
Drive Types	Phillips, Pozidrive, Torx, Tamper resistant 6-Lobe, Phil-slot, Hexagon Socket, Square recess
Thread Types	Coarse thread, Fine thread, Partial thread,
Point Types	Flat
Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1),Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : 2,5-8 mm. Length : 5-100 mm.

Socket Head Cap	Countersunk (CSK), Pan, Oval Countersunk, Hexagon,Bugle, Truss
Drive Types	Phillips, Pozidrive, Torx, Tamper resistant 6-Lobe, Phil-slot, Hexagon Socket, Square recess
Thread Types	Coarse thread, Fine thread, Partial thread
Materials	Carbon Steel, Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1)
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : M.2-M.8 Length : 4-100 mm.

WELD BOLTS

WELD BOLTS
We produce weld bolts such as Capacitor Discharge Studs, Screws with Projection on Top of Head or Under Head, Self-clinching Studs for Automotive Industry. Weld bolts provide strong fixing with less labor cost as you don't need to spend time to prepare a hole.

Thread Types	Coarse thread, Fine thread, Partial thread
Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1) Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : M.3-M.8 Length : 6-100 mm.

RIVETS FOR WINDSCREEN WIPERS

RIVETS FOR WINDSCREEN WIPERS
We produce special rivets for windscreen wipers according to your samples or technical drawings.

Materials	Stainless Steel 304Cu(A2), Stainless Steel 316Cu(A4), Stainless Steel 410(A1) Carbon Steel
Finish	WhiteZinc, Yellow Zinc, Black Zinc, Nickel , Zinc Nikel, DeltaProtect
Dimensions	Diameter : 2-8 mm. Length : 3-100 mm.